There is no specific way to fight fog. Some people tear from the inside out and do heavy fog at the beginning of the heavier place. When the lighter place is lighter at the end, we temporarily call it the "Northwest Rain" pattern (because it's The disadvantage is that the fog will form a fog like a radial line. Some people use the spiral method from the inside to the outside. At the beginning, the force is heavier. When it is heavy fog, the other way is like the nozzle of the printer. Constantly going back and forth and gradually developing outwards, the beginning of the place is more powerful, gradually put light power, can also form
A fog like a gradient.

No matter which kind of fogging method has its own advantages and disadvantages, in general, if there is a certain degree of practice, the fog produced by the second and third methods is relatively thin and dense, but if there is no considerable practice, The fog that it hits can easily become light and heavy, and it can be turned black or jumped.
Most beginners prefer to use the first method to help people fog, because this method is the easiest to learn, in addition to the need to patiently stitch a needle and slowly weaving, generally do not need any skills. If you can practice hard, you can also minimize the "northwest rain" (radial fog). This method is also used by many professional tattoo artists to use small maps.
After introducing the above methods of fogging, let us introduce what kind of fog should be used in a picture. Below we will explain with a simple geometric diagram. In terms of fogging, the geometric pattern has a light and heavy fog. As long as it can be black and even, it is a good picture. The problem is that the generally inexperienced tattooer is worried about the fog. Beyond the lines, the following results are formed.
A: There is a gap between fog and fog.
B: Can't stick to the line
C: Beat the fog outside the line
If you want to make the fog of the geometric pattern, without leaving a gap between the line and the fog, or accidentally knocking the fog out of the line, don’t touch the skin immediately after the needle is stained, because it’s just stained. The needle of the material, under the strong vibration of the electromagnetic coil, the color of the freshly dipped needle will be shaken and sprayed. At this time, if the needle is directly touched by the skin, the color of the spray will just touch you. The line is covered. In the case where the lines cannot be seen clearly, it is easy to shoot the fog out of the line or not to stick to the line and form a white space. The correct way is to take a small square or paper towel and touch the needle. Absorb some splashing color in front of the skin, so that the needle can slowly slide the fog out of the line, but another problem arises. When you start to play slowly, it is stuck in the needle. The colorant will also slowly flow out with the vibration and open on the skin. When your needle has not run to the opposite line, the opened color has covered the line, then we have to tattoo The machine is lifted, and then the opposite line is connected to the fog. Just repeat the two procedures to create a standard "geometric pattern".
In addition, a rose flower is used to explain that beginners often think that "red flower green leaves" must be part of the color of the flower leaves. In fact, we know that the color of the petals is dark, dark and dark, and the leaves are The veins are different. Therefore, when we are painting a pattern, we must distinguish where it is necessary to apply heavy fog, and then work on it. For example, when we color the petals, the floral part of the petals should be heavy fog toward the petals. Edge gradation, the pattern thus processed has a hierarchy,
Somatosensory.